Custom Shower Doors
How to buy ?
​
At Nouera Shower Systems we manufacture a large range of custom sized shower doors.
Getting a door manufactured is easy, and only takes 21 days from the day of ordering to dispatch.
​
The first stage of ordering a door is to get a quote, and to do this we will need some information.
​
-
Please read the measurement guide below carefully, then download the correct form.
​​
-
Fill out the form and take it down to your local Mitre 10 store. Need to know where your closest store is? CLICK HERE
​
-
The friendly staff in the bathroom department will send us your information, and we will send you a quote once we've completed the design and price.
​
Measurement Guide
​
Custom Pivot Door, 3-Panel Stacker Door and 2-Panel Sliding Door
Please run through the steps below and ensure that accurate measurements are provided
​
1. Check that the walls and the base of the shower are plumb and level. The doors, however, are adjustable meaning slight irregularities will cause no problem during installation.
​
2. Mark on the shower base where the front of the shower and the return is to sit.
​
3. Provide the necessary shower door dimensions by measuring the shower base you have previously marked.
​
4. Ordering a Pivot Door - please note this door can be turned upside down so they can hinge from the right hand or left hand side. Please also ensure you measure that the door has enough room to open into the bathroom and allow enough access into the shower.
​
5. Ordering a 3 Panel Stacker Door - specify dimensions as indicated on diagrams. Door width and return width
(if required). Dimensions to be outside of the shower door frame. Also fixing must be specified as per configuration diagram.
​
6. Ordering a 2 Panel Sliding Door - specify dimensions as indicated on diagrams. Door width and return width
(if required). Dimensions to be outside of the shower door frame. Also fixing must be specified as per configuration diagram.
​
​
CUSTOM DOOR ORDER FORMS ​